SYSTEM SPECIFICATIONS  |
|
|
VTSL-3200 (For Air Cooled Torches Only)
Up to 3 Torches, 200 amps Continuous Duty
Package includes:
• 1 Gas Hose (supply)
• Secondary Power Cable, Cable Lugs Both Ends
• Housing Ground Cable
• (105Z57) Power Cable Adaptors Pre-installed Standard
• Owner's Manual
• 1 year warranty
|
VTSL-3200
Cost Ea. $2,000.00
|
|
Dimensions
|
18" W
|
15" D
|
12 1/4" H
|
34 lbs
|
|
|
Dimensions w/TCO
|
25 3/4" W
|
21" D
|
30 1/4" H
|
46 lbs
|
|
|
 |
VTSL-3400 (For Water or Water & Air Cooled Torches)
Up to 3 Torches, 400 amps Continuous Duty
Package includes:
• 1 Gas Hose (supply)
• 2 Coolant Hoses (supply & return)
• Secondary 2/0 Power Cable, Cable Lugs Both Ends
• Housing Ground Cable
• (45V11) Power Cable Adaptors Pre-installed Standard
• Owner's Manual
• 1 year warranty |
VTSL-3400
Cost Ea.$2,527.00
|
|
Dimensions
|
18" W
|
15" D
|
12 1/4" H
|
42 lbs
|
|
|
Dimensions w/TCO
|
25 3/4" W
|
21" D
|
30 1/4" H
|
54 lbs
|
|
|
 |
VTSL-3600 (For Water or Water & Air Cooled Torches)
Up to 3 Torches, 600 amps @ 60% Duty Cycle, 500 amps Continuous Duty
Package includes:
• 1 Gas Hose (supply)
• 2 Coolant Hoses (supply & return)
• Secondary 4/0 Power Cable, Cable Lug One End, Both if Requested
• Housing Ground Cable
• (45V11) Power Cable Adaptors Pre-installed Standard
• Owner's Manual
• 1 year warranty |
VTSL-3600
Cost Ea.$2,996.00
|
|
Dimensions
|
18" W
|
15" D
|
12 1/4" H
|
46 lbs
|
|
|
Dimensions w/TCO
|
25 3/4" W
|
21" D
|
30 1/4" H
|
58 lbs
|
|
|
|
|
OPTIONS  |
|
|
The TORCH CABLE ORGANIZER
is used to store the torches in a manner that will extend the life of each torch and cable set, keeping unused torches off the floor eliminating unnecessary tripping hazards and cable damage. This ships as a billable weight package of 63 pounds.
| PART# - TCO |
WEIGHT - 12 lbs.
|
|
TCO
Cost Ea. $416.00
|
|
|
The SYSTEM MOUNTING BRACKET 2-350/400
is used to support a Versa-TIG™ System directly over a Miller Dynasty® 350, 400 or Maxstar® 350, 400 power source mounted to the tig runner cart. The all welded stainless steel bracket is a tray that supports the system and serves as a secondary containment tray with drain hose for coolant leak protection and collection. Includes all the necessary mounting hardware and rubber tray edging. This ships as a billable weight package of 35 pounds.
Miller Dynasty® and Maxstar® are trademarks of Miller Electric Manufacturing Company.
| PART# - SMB 2-350/400 |
WEIGHT - 10 lbs.
|
|
SMB 2-350/400
Cost Ea. $458.00
|
|
|
The SYSTEM MOUNTING BRACKET 2-700/800
is used to support a Versa-TIG™ System directly over a Miller Dynasty® 700, 800 or Maxstar® 700, 800 power source mounted to the tig runner cart. The all welded stainless steel bracket is a tray that supports the system and serves as a secondary containment tray with drain hose for coolant leak protection and collection. Includes all the necessary mounting hardware and rubber tray edging. This ships as a billable weight package of 62 pounds.
Miller Dynasty® and Maxstar® are trademarks of Miller Electric Manufacturing Company.
| PART# - SMB 2-700/800 |
WEIGHT - 13 lbs.
|
|
SMB 2-700/800
Cost Ea. $492.00
|
|
|
The TORCH HOLDER BRACKET
allows torch handles to be inserted into clips and held in position on a bracket attached to the left, right side or both sides of the Versa-TIG™ housing for easy storage and selection. This will need to be notched if used with the TCO.
| PART# - THB |
WEIGHT - 3 lbs.
|
|
THB
Cost Ea. $142.00
|
|
|
The CABLE HOLDER BRACKET
llows the torch cables to be stored neatly on the left or right side of a tig runner cart for Miller Dynasty® and Maxstar® power sources. They can also be used for work lead cable, excess power cable foot pedal cables and gas hoses. Includes mounting hardware.
| PART# - CHB |
WEIGHT - 2 lbs.
|
|
CHB
Cost Ea. $52.00
|
|
|
The MULTIPLE GAS SOURCE VALVE
allows up to 3 independent gas supplies like Argon, Helium or a mixed gas to be directed to any torch connected to the system in seconds. Includes valve, mounting bracket and (4) four gas hoses.
| PART# - MGSV |
WEIGHT - 5 lbs.
|
|
MGSV
Cost Ea. $448.00
|
|
|
The IN-LINE COOLANT PRESSURE GAUGE
is used to verify coolant system pressure and can indicate a coolant system problem before a torch failure occurs.
| PART# - ICPG |
WEIGHT - .5 lbs.
|
|
ICPG
Cost Ea. $121.00
|
|
|
The SYSTEM MOUNTING BRACKET
is used to mount the VTSL system from a wall or on the right or left side of a power source. It is pre-drilled for the Versa-TIG™ System to be installed any direction. We recommend the use of this bracket for VTSL-3400 installations on a power source. This ships as a billable weight package of 63 pounds.
| PART# - SMB |
WEIGHT - 17 lbs.
|
|
SMB
Cost Ea. $315.00
|
|
|
The EXTRA TORCH POSITION 4 (1A)
changes the standard (3) torch position system into a (4) torch position system. Must be factory installed when the system is built. Can not be field installed later. Add 5 days for delivery.
| PART# - ETP4 |
WEIGHT - 2 lbs.
|
|
ETP4
Cost Ea. $521.00
|
|
|
The EXTRA TORCH POSITION 5 (2A)
changes the customized (4) torch position system above, into a (5) torch position system. Must be factory installed when the system is built. Can not be field installed later. Add 5 days for delivery.
| PART# - ETP5 |
WEIGHT - 2 lbs.
|
|
ETP5
Cost Ea. $521.00
|
|
|
The BLACK LEATHER VELCRO TORCH CABLE COVER
keeps torch cables together and helps protects them from abrasion, heat, UV and oils. They are durable, lightweight, supple, remain flexible in all climates and are easy to open and close. Measures 3-3/4"wide by 10' long. Closes to 1" I.D.
| PART# - BLVTCC-3.75-10 |
WEIGHT - 1 lbs.
|
|
BLVTCC-3.75-10
Cost Ea. $70.00
|
|
|
The BLACK LEATHER VELCRO TORCH CABLE COVER
keeps torch cables together and helps protects them from abrasion, heat, UV and oils. They are durable, lightweight, supple, remain flexible in all climates and are easy to open and close. Measures 3-3/4"wide by 22' long. Closes to 1" I.D.
| PART# - BLVTCC-3.75-22 |
WEIGHT - 1 lbs.
|
|
BLVTCC-3.75-22
Cost Ea. $139.00
|
|
|
The BLACK LEATHER VELCRO TORCH CABLE COVER
keeps torch cables together and helps protects them from abrasion, heat, UV and oils. They are durable, lightweight, supple, remain flexible in all climates and are easy to open and close. Measures 4-1/2"wide by 10' long. Closes to 1-1/4" I.D.
| PART# - BLVTCC-4.5-10 |
WEIGHT - 1 lbs.
|
|
BLVTCC-4.5-10
Cost Ea. $73.00
|
|
|
The BLACK LEATHER VELCRO TORCH CABLE COVER
keeps torch cables together and helps protects them from abrasion, heat, UV and oils. They are durable, lightweight, supple, remain flexible in all climates and are easy to open and close. Measures 4-1/2"wide by 22' long. Closes to 1-1/4" I.D.
| PART# - BLVTCC-4.5-22 |
WEIGHT - 1 lbs.
|
|
BLVTCC-4.5-22
Cost Ea. $146.00
|
TO ORDER,
EMAIL OR CALL 614-655-3200
All Items ship by UPS, FedEx, or LTL; F.O.B. Columbus, Ohio, USA.
All export sales must be prepaid prior to shipping.
Versa-TIG™ Systems are Made in the USA
Dynasty® and Maxstar® are trademarks of Miller Electric Mfg Co.
|
